Author Topic: critical update to V1.69  (Read 1508 times)

Metal_ash

  • Dark Lord
  • *****
  • Posts: 871
critical update to V1.69
« on: January 19, 2010, 08:18:51 PM »
Nwn working perfect and running smoothly, that be before i update it to 1.69 though a critical update...
after the update be done and i chose to play NWN and the NWN loader starts it just shuts down.

I am on windows 7 if that have any meaning.

anyone have any ideas of what this might be?

Knas

  • Developers
  • Head DMs
  • Dark Power
  • ******
  • Posts: 8735
  • Worthless phony
Re: critical update to V1.69
« Reply #1 on: January 19, 2010, 08:31:31 PM »
Re-install and use the normal patch system?

Metal_ash

  • Dark Lord
  • *****
  • Posts: 871
Re: critical update to V1.69
« Reply #2 on: January 19, 2010, 08:32:30 PM »
Tried that to before posting here but same failur.

Metal_ash

  • Dark Lord
  • *****
  • Posts: 871
Re: critical update to V1.69
« Reply #3 on: January 19, 2010, 08:51:38 PM »
Can it matter if i update before install cep2.2?

failed.bard

  • Guest
Re: critical update to V1.69
« Reply #4 on: January 20, 2010, 12:44:38 AM »
 After the update you might have to set it to administrator mode again, and re-set the emulation mode, if it made a new icon.

Bluebomber4evr

  • Head DM, Developer and Ravenloft Trivia Guru/Community Council
  • Administrator
  • Dark Power
  • *
  • Posts: 20694
    • http://www.nwnravenloft.com
Re: critical update to V1.69
« Reply #5 on: January 20, 2010, 02:02:09 AM »
The CEP won't have any effect on your NWN installation.

Bluebomber4evr: The Justice, not you, since 2002

Metal_ash

  • Dark Lord
  • *****
  • Posts: 871
Re: critical update to V1.69
« Reply #6 on: January 20, 2010, 02:55:04 AM »
After the update you might have to set it to administrator mode again, and re-set the emulation mode, if it made a new icon.

Hmmm, Okays..working on this, how is this done then? How do i go to administrator mode and re set the emulation mode?

failed.bard

  • Guest
Re: critical update to V1.69
« Reply #7 on: January 20, 2010, 03:05:41 AM »
Right click the Icon for it, select properties.
Compatability mode will have its own tab, set it to windows XP (I run mine under service pack 2)
Under 7 the box for running it as an administrtor is in the same tab.  This needs to be set for nwn.exe or nwmaiin.exe, depending which you load into.

Metal_ash

  • Dark Lord
  • *****
  • Posts: 871
Re: critical update to V1.69
« Reply #8 on: January 20, 2010, 03:17:24 AM »
Right click the Icon for it, select properties.
Compatability mode will have its own tab, set it to windows XP (I run mine under service pack 2)
Under 7 the box for running it as an administrtor is in the same tab.  This needs to be set for nwn.exe or nwmaiin.exe, depending which you load into.

HAHA..far from a hacker as you may have noticed by now but i got this one to work now it seems.

Now to the new problem for is the CEP_22_Full_c3...When i try run this one nothing seems to happend, same was last night when i tried it...i left the computer for ten minutes and nothing seems to happend at all. I know this one can take some time, but it sure not took a full 10 Min's for anything to happend on my last computer.
Ideas?

Metal_ash

  • Dark Lord
  • *****
  • Posts: 871
Re: critical update to V1.69
« Reply #9 on: January 20, 2010, 03:49:16 AM »
Ya!!!  :D Have got this running smooth now...Thanks!